Forever Flex-Soft (NoCut) for Laser Printers white and colors, 100 sheets 11×17

Description

Forever Flex-Soft (NoCut) 11×17  White and colors  no cut for laser Printers and Copiers

No Cut Transfer Paper for Black and white or CMYK laser or LED Printers, also works on copiers. You will receive 100 sheets part A and part B.  Produce Foil designs no weeding. No special toners required for this self weeding transfer paper. You will need also a Matt or Gloss Anti Stick Sheet sold separately.  Printable materials:
• Cotton • Mixed Fibers • Polyester (No Dye Migration) • Nylon • Wood
• Felt • Paper • Leather and many more…

11×17  White and colors no cut

Description

Transfer Foil for Black and White or CMYK Laser/LED Printers and Copiers

Print Black and get White, Metallic or Neon Colors!

No Cutting, No Weeding!

Advantages:

No Cutting and Weeding

Low substrate application temperatures of 100-160°C (212°F-320°F)

Printing of almost all fabrics & hard surfaces (Cotton, Blended Fabrics, Polyester, Nylon, Polypropylene, Paper, Wood, etc.)

For Black/White or CMYK Laser/LED Printers and Copiers

Washable up to 40°C (104°F)

Fine details and difficult graphics transferable without problems

Huge time savings

Unbelievable design and motive possibilities (vintage, used look, fashion, vectors)

Available in DIN A4, DIN A3, 8,5×11 in., 11×17 in.

Now you can produce self-weeding transfers in white, metallic and neon colors, without a special toner and without cutting and weeding.

The most annoying step, the weeding of the flex foils, is no longer required with this new and innovative material.

Our well known 2-Paper-System now with the difference, that the A-Foil coating is colored with the single colors of White, Metallic or Neon, instead of being transparent. This offers the possibility of very fast production in a cost effective way, without investing in an expensive printing system or plotter.

It has all the combined characteristics of the established Flex Foil, with the additional benefit of our (No-Cut) system.

The 2-Paper-System from FOREVER gives amazing and consistent results.
First print on the transparent A-Foil, press it together with the dark opaque B-Paper LowTemp and separate both sheets from each other while hot.
Now, you have white coverage on the image through the B-Paper LowTemp, which not only increase the opacity of the transfer on dark garments, but also contributes to its washability. Both steps are done at the same temperature. The application tolerances are extremely high, reducing handling errors and allowing the user high flexibility.

A – FOIL
This is the transfer foil on which you print your image. It holds the toner extremely well and does not leave any residues in the copier or any background on the garment.

B-PAPER LowTemp
The white opaque coating on the B-Paper sheet only sticks to the toner on the A-Foil and performs so well that even the finest detailed designs can be handled.

Available Formats

DIN A3 (297 x 420 mm, 11.7″ x 16.5″)

DIN A4 (210 x 297 mm, 8.27″ x 11.7″)

No cutting and weeding

Low substrate application temperatures of 212°F-320°F

Printing of almost all fabrics & hard surfaces (Cotton, Blended Fabrics, Polyester, Nylon, Polypropylene, Paper, Wood, etc.)

For Black/White or CMYK Laser/LED Printers and Copiers

Washable up to 104°F

Fine details and difficult graphics transferable without problems

Enormous time savings

Unbelievable design possibilities (vintage, used look, fashion, vectors)

Available in 8.5×11 and 11×17

Print Black & get White, Metallic or Neon Colors with No Cutting & No Weeding!

TIPS:

The Forever Flex Soft two-step media is capable of being printed on either the A-Film or the B-Paper.

When printing with inexpensive Black Toner printers – such as the Canon 6030 or similar models – it is recommended to print on the B Paper. This allows the printer fuser to marry one side of the toner to the adhesive in the B sheet and it allows you to print in right reading form without having to mirror your clients’ artwork as these printers typically do not have a built-in mirror function. It also allows one temp (300°-310°) marry for all colors.

When printing with more expensive color printers it is suggested to set your artwork to be a rich black (100C,100M,100Y, 100K) and use the settings in these printers to “mirror print” on the A-film. This avoids even the remote possibility of the B adhesive sticking to the fuser. Then follow the Forever factory Instruction sheet for the marry temp.