Viper XPT1000 Pre-treatment Machine
The Viper XPT-1000 - The Next Evolution in DTG Pretreating
The Viper XPT-1000 pretreatment machine is the next evolution in direct to garment pretreating. It is a totally new concept and engineered to give you the best, most efficient way to pretreat your DTG garments.
Even though it is an "open" design, we've taken our many years of experience in manufacturing pretreatment machines and expertise in fluid dynamics to create a unique and easy to use machine that is more efficient than other machines in the market - and at a price that is affordable for every DTG shop. Now there is NO EXCUSE for continuing to pretreat by hand. And the spray STAY IN the spray area - not all over your shop.
This pretreatment machine is super-simple to use. You can set the spray width (by adjusting the spray head height) and location of the spray (by moving the spray head left to right). Using the simple controls on the front panel, set the spray length (from 2-24") and then the amount of fluid applied (10%-100%). We include a simple chart on the top of the unit to accurately tell you how to set the Speed to achieve the desired amount of pretreatment for your shirt.
The Viper XPT-1000 - Easy and Fast Fluid Management
Proper maintenance and cleaning of your pretreatment machine is key to making sure you get a long and productive life from your equipment. Pretreatment by nature can be hard on any piece of equipment. We've taken our popular cleaning routine from the ViperONE and applied it to our XPT-1000.
With three simple fluid inputs, fluid management is fast and easy. Simply connect your pretreatment, clean water, and CLEANING SOLUTION to the XPT-1000. By pressing the corresponding buttons, that fluid is pushed through the system. To load the pretreatment, simply place a bottle under the spray nozzle and press the RED pretreatment button. You'll see the pretreatment being sucked through the lines and into the spray head. At the end of the work day, put your bottle back under the spray nozzle, press the CLEAN button for about 10 seconds and then the WATER button for 10 seconds. The system will flush the pretreatment and cleaning solution through the Viper leaving your Viper XPT-1000 ready to sit until the next time you need to pretreat. There is no need to remove the spray tip daily.
VIPER XPT-1000 SPECIFICATIONS
Dimensions (Complete Unit)
33.5" wide x 36.5" deep x 6.875" high
Shipping Dimensions
Box #1: Spray Unit and Platen - 50 lbs
14" wide x 39" deep x 20" high
Box #2: Spray Base - 32 lbs
38" wide x 40" deep x 10" high
Power Requirements: 120VAC or 220VAC (24V Power Supply)
Fits on 24" deep table
All Electric - Easy to Use
Simple To Use Controls
Using the simple controls on the front panel, set the spray length (from 2-24") and then the amount of fluid applied (10%-100%). We include a simple chart on the top of the unit to accurately tell you how to set the Speed to achieve the desired amount of pretreatment for your shirt. It is quick and easy.
Simple Fluid Management
Simply connect your pretreatment, clean water, and CLEANING SOLUTION. By pressing the corresponding buttons, that fluid is pushed through the system. To load the pretreatment, simply place a bottle under the spray nozzle and press the RED pretreatment button.
Easy Laser Alignment
The built in line laser allows for fast and easy visual alignment of garments, pockets and other pretreating locations. Pretreating in the correct spot on the garment has never been easier.
Adjustable Spray Area
The easily adjustable spray head allows for instant changing of the spray width and location with adjustments left to right as well as up and down. Fast and easy adjustments with a spray area up to 20" x 24".