Prestige R2 Curing Oven Bundle

$8,180.90From $7,771.99
Shipping calculated at checkout.

Oven Size: 16x20

16x20
A2

Training (Required): Virtual Training

Virtual Training
On-Site Training
$8,180.90 $7,771.99
SKU: BNDL-DTFS-PRR2-PX16X20-V
amazon paymentsamerican expressapple paydankortdiners clubdiscoverdogecoindwollaforbrugsforeningeninteracgoogle payjcbmaestromasterpaypalshopify payvisa

Prestige R2 User Manual

Prestige R2 Spec Sheet

Bundle the Prestige R2 DTF Printer with a Phoenix Curing Oven, and DTF supplies, and save over $700! Get everything you need for a powerhouse DTF printing workflow in one purchase.

Training:

  • Training is required for all Prestige R2 purchases. Choose from the following options:
    • Virtual Training: Included with purchase
    • On-Site Training: Additional $2500

Choose from one of the following options:

Prestige R2 DTF Printer

Print with precision and flair with the Prestige R2 DTF Printer! With its chic, integrated design, this printer combines elegant desktop convenience with powerful performance for all those looking to get started with DTF.

    Features:

    • Speed: 27 sq. ft. / hour, 6pass
    • White Ink Management System (WIMS): timed white ink stirring system to circulate and maintain white ink inside printer
    • Passive Auto-Cleaning: when printer is left on, it will automatically maintain and clean printhead every 4 hours
    • Active Auto-Cleaning: during set intervals (even during printing), printer can stop to clean printhead
    • Head Strike Sensor: helps prevent damage to printhead
    • 1 Liter bulk ink cartridges: more ink for all your printing needs
    • Auto Ink Alert System: informs user when ink is running low
    • Automatic Film Sensor: if film runs out/is not detected, stops printing

    Benefits:

    • Size: Desktop sized
    • Great for beginners: perfect balance of power and affordability
    • Easy access/repair: intuitive, labeled board design and connections for easy access and repair

    What's Included:

    • Conditional 1 Year Warranty on up to 2 Printheads*
      • *Use of non-DTF Station ink, film, powder, or other supplies will void warranty coverage. Details depend on training option selected. Terms & Conditions apply. Visit link for full details.
    • DigiRIP RIP Software - including fully functional Software Trial Version (15 Day)
    • Power Cord
    • Tools
    • Ink Dampers
    • Ink Filters
    • Ink Tube
    • Ink Diverter
    • USB Dongle
    • Ribbon Cables
    • Screws
    • Feed roller components

    Specifications:

    • Printer head: Dual Epson XP600 print heads
    • Mainboard: Honson
    • Interface: TCP
    • Software: DigiRIP RIP Software (Compatible with Windows Only)
    • Max. Film Width: to 13" (33 cm)
    • Printing Speed: 27 sq ft / hour, 6pass
    • Machine Weight: 110 lbs
    • Packaging Weight: 142 lbs
    • Dimensions:
      • Printer: 29" x 14" x 14"
      • Packaging: 32 1/4" x 15 3/4" x 15 3/4"
    • Daily Output (Based on design size as 12" x 14", 8 hrs per day): 160 pcs
    • Suitable: Entry Level

    Applicable Industries

    • Garments
    • Tote Bags
    • Caps
    • And more!

    Fabrics:

    • Cotton
    • Polyester
    • PU
    • And more!

    Compatible With

    • DigiRIP RIP Software
    • Phoenix Air 16x20 Curing Oven
    • Phoenix A2 Curing Oven
    • Seismo M16 DTF Powder Applicator and Dryer

        --------------------------------------------------

        Phoenix Air 16x20 Curing Oven

        Phoenix Air 16x20 Operation Manual

        Note: It is recommended to turn on the air purifier ONLY while the oven timer is running. Leaving the air purifier on for prolonged periods of time may increase the overall temperature of the oven beyond recommended curing temperature.

        The Phoenix Air 16x20 Curing Oven is perfect for curing large film sizes, such as 13" x 19", 14" x 16", 16" x 20", and more! This oven comes with a purifier unit built-in to ensure the safety of your production space. It has a digital control unit that is easy to set and allows precise settings of temperature and time for consistent results. A fusing process is started at the touch of a button. After the set time has elapsed, an acoustic signal sounds alerting you to remove the transfer film.

        Note: Unlike the previous Phoenix 16x20 Curing Oven, the Phoenix Air 16x20 oven uses an open-top/platform, rather than a tray, to cure films. See the Phoenix A3+ Curing Oven and A2 Curing Oven for similar heating methods.

        Phoenix Air 16x20 Curing Oven can be bundled with the Prestige A3+R DTF Printer.

        Features:

        • Cure Transfers within a minute at 230~248°F
        • Bottom Heating Element Rather than Top
        • Self Contained Purification system
          • Replace Filter 1~3 months depending on usage

        Benefits:

        • Easy to use
        • Built-in purifier - save space & money

        What's Included:

        • Handles come unassembled
        • Power cord
        • Training Video
        • Warranty Policy
        • Lifetime Tech Support*
          • *Only for active customers who have purchased DTF inks or supplies within the last 2 months

        Specifications:

        • Voltage: 110V
        • Power: 0.88KW
        • Temperature Range: 0-150°C / 300°F
        • Machine Size: 29"W x 21"D x 7.75"H
        • Packaging Size: 31"W x 25"D x 10.75"H
        • Product Weight: 30 lbs
        • Packaging Weight: 35 lbs

        --------------------------------------------------

        DTF Station Phoenix A2 Curing Oven - 15" x 24"

          What's the best curing method for YOUR business?

          Features:

          • Contact Heating - The heating plate makes melting more uniform, and reduces chances of damage during transportation as well.
          • Lower Melting Temperature - With melting temp. of 250°F, melting of your DTF powder is more uniform, and the adhesion of your design is stronger.
          • Countdown Reminder - Timely reminder to check the melting state.

          What's Included:

          Specifications:

          • Heating Platform: 15"x24"
          • Heating Method: Contact Heating
          • Heating temperature: 0-130°C (266°F) (Adjustable)
          • Heating Time: 0-999S (Adjustable)
          • Application: DTF Film Heating

          Applicable Industries:

          • Curtain
          • Canvas Shoes
          • Bedding
          • Canvas Bag
          • Hold Pillow
          • Trousers

            -----------------------------------------------------------------

            DTF Station Purifier MINI Portable Air Filter

            The Portable Air Filter absorbs and filters any gases or dust and can achieve 99.97% purification rate, which prevents environmental pollution.

            Benefits:

            • Strong Ventilation
            • Multi-angle adjustable hose
            • Low noise
            • Easy to use

            Features:

            • Greater Dust Capacity - Square vertical filter core has larger dust capacity than single-layer filter core. Longer service time of filter core.
            • Movable And Adjustable - The smoke absorbing pipe can be disassembled, and the length of the pipe can be adjusted.
            • Easy To Use - The Purifier is plug-in.
            • 47.24 inch Long Hose

            • 8" x 8" x 9.5" (W x D x H)

            • 9 lbs

            Specifications:

            • Voltage: 110V
            • Wide applications: Soldering iron welding station; Laser welding, engraving, marking, cutting; Chemistry laboratory; Medical treatment, cosmetology, etc.

            NOTE: Please replace your filter at least every 3 months

            -----------------------------------------------------

            DigiRIP RIP Software

            The DigiRIP RIP Software is the ultimate choice for direct to film printmakers from DTF Station. With a powerful suite of features, it stands out amongst its peers for its convenience and maximum efficiency. Enjoy a single Direct to Film software package and discover the power of DigiRIP RIP Software today.

            • DigiRIP - for printers 16" or smaller
            • DigiRIP Pro - for printers 17" or wider

            Software Trial Version (15 Day) - Compatible with Windows only

            -----------------------------------------------------

            DTF Station Warm Peel DTF Film Rolls

            Check out this guide on making your own costumes using this DTF film!

            Features:

            1. High Ink Loading Layer: You can lay down more color / white to create rich colored decorated DTF prints.
            2. Warm Peel: Peel off the film without a long wait after the first press.
            3. Single Side Matte: Easily distinguish the print side.

            Compatible with:

            • Any DTF printer on the market - **Recommended use with a roll printer**
            • Looking for DTF film sheets instead? Go here.

              Instructions:

              1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
              2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
              3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315°F, 1min).
              4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
              5. After the first press,
                Option 1: Wait for 4-6 seconds and remove the film gently
                Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
              6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

              NOTE: DTF Station Film A3 and A3+ Sheets and A3+ (13") Rolls have returned to their normal pricing, after a temporary price decrease.

              -----------------------------------------------------

              Color Max DTF Ink

              Please refer to these instructions on how to switch your machines from DTF Station ink to Color Max Ink.

              Features:

              • Engineered for DTF printing
              • Even and consistent texture without any loss in color vibrancy
              • High color density and wide color gamut
              • Pairs well with DTF Station DTF Powder and DTF Film

              Benefits:

              • Consistent and professional print quality
              • Tailor-made for reliable DTF printing results

              Specifications:

                -----------------------------------------------------

                Color Prime Hot Melt Powder for Direct to Film

                Hot Melt Powder Material Safety Data Sheet


                Formulated for use during Direct to Film (DTG Transfer) printing, Color Prime adhesive powder is a crucial part of any DTF printing workflow. Cover your Direct to Film media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more!

                Features:

                • After baking the powder, solid white for more vibrant colors
                • Even and regular particles for quality graphics and good adherence

                Sizes:

                • 1 kg

                Instructions (for use with DTF Station Warm Peel film):

                1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
                2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
                3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
                4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
                5. After the first press,
                  Option 1: Wait for 4-6 seconds and remove the film gently
                  Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
                6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

                  WARNING

                  • Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.

                  • Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.

                  Ecofreen Oeko-Tex Certificate

                  NOTE

                  • DTF (Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results!
                  • Ecofreen hot-melt adhesive powder has excellent bonding and flexibility properties with DTF inks.
                  • The designed fabrics or printed shirts have a good wash characteristics.
                  • The fabric has very slight hand feel touch.
                  • The process is much faster than Vinyl printing (Vinyl Printer).

                    -----------------------------------------------------

                    Prestige DTF Printer Cleaning Solution

                    NOTE: Color may vary

                    Prestige DTF Printer Cleaning Solution is suitable for running maintenance on DTG and DTF printing machines, including the Prestige A3+ Desktop DTF Printer and more! Using this solution regularly will extend the life of your printer.

                    -----------------------------------------------------

                    DTF Station Isopropyl Alcohol 16oz

                    99% Isopropyl alcohol can clean your water-based digital inks and it can remove unwanted ink splashes without scratches, unlike regular alcohol.

                    Use this ONLY on Printhead Guards, Encoder Strip, Encoder Wheels, and Platens or areas where unwanted ink splashes on metals/ plastic. Please note this may change/damage certain paints on metal or plastic. Use with care.

                    *Please contact us if you are not sure whether this product would be a good solution.

                    Use this product with our lint-free wipe.

                    Do not use this product on printheads, capping station, wiper blade, and any other areas not specified above. Please note that this product can damage your parts if used improperly. It is also not intended for use on the skin.

                    Wash face, hands, and any exposed skin thoroughly after handling the product.

                    Do not insert this into the tube/ lines.

                    When using this product do not eat, drink or smoke. Please wear protective gloves/protective clothing/eye protection/face protection.

                    -----------------------------------------------------

                    DTF Station Lint Free Wipes 4" x 4" - 30 Sheets

                    Ultra soft, non-abrasive, lint-free wipes are designed for sensitive surfaces such as printhead and encoder strip.

                    They are 99.999% pure and guaranteed safe for cleaning printhead surface, encoder strip and capping station.

                    Great for printhead overnight soaking / locking.

                    -----------------------------------------------------

                    DTF Station 7" Cleaning Swabs - 50 Each

                    Cleaning Swabs to use alongside DTF Station printers.

                    These Foam Cleaning Swabs are perfect for detailed cleaning on various parts of DTF Station's printers. Available in packs of 50 swabs each.

                    Features

                    • Foam Head
                    • Pairs well with all DTF Station printers

                    Benefits

                    • Narrow form allows for detailed cleaning of small parts/areas

                    Specifications

                    • Swab Material: Foam
                    • Swab Length: 7 inches
                    • Quantity: 50 swabs in each pack