GenieJet Affinity II Prep and Fountain Solution and Plate Wetting , 5 liter

GenieJet Affinity II Prep and Fountain Solution, Plate Wetting, 1 5 liter for use with GenieJet Inkjet Plates used in Epson Inkjet Printers.

Epson Inkjet Printer using K3 inks with Vivid Magenta Inks and a laminator with variable speeds and temperature controls and a rip and you will be making plates for a small price.
All it takes is a standard Epson Printer and Ink, the GenieJet RIP, a simple dryer and the star of the show, GenieJet polyester inkjet plates.
Many print shops may already contain much of the system.

GenieJet Plate Output Capability:
Spot Size - 25-40 micron
Reverse type reproduction - 6-8 pt
Dot reproduction - 2-95% dot
Screen Ruling - up to 150 lpi
Physical Dot Gain - 25 - 40% on print
Print run-length - up to 10,000 impressions
Registration accuracy - 5 - 25 µ tolerance

This chemical is a dual purpose product. First it is used in a non-diluted form, as a plate prep. Before the plate is mounted on the press, but after it has been through the dryer, the entire surface of the plate must be wiped with Genie-Affinity. This help to reduce the porosity of the plate surface, to better enable adequate dampening on the press, during the print run. It is a very important step in the workflow, and any parts of the plate that have not been treated will become sensitive, and likely to tone on the press. After the plate has been wiped with PolyAffinity it is not a problem if the plate dries, or is mounted while still wet.

Secondly, it is used as a fountain concentrate. The manufacturer recommends a dilution ratio of 2 ounces per quart, whereas our experience shows that this is too strong, and one ounce per quart works much better in most circumstances.

Like all polyester plates, GenieJet works much better if the plate is made wet manually before starting the press. We therefore recommend that the diluted "fountain mix" is used for this purpose. Either the plate can be wiped before starting the press, or a spray bottle of the fount mix can be used to lightly spray the plate surface once the press is turning, before lowering the ink form rollers.

Inkjet polyester plates for inkjet printers. GenieJet Inkjet Plates, Epson Inkjet Poly Plates, your full line of CTP chem free plates. Epson Chem free inkjet and laser offset plates in polyester and metal. Genie jet plates Inkjet polyester plates. Epson Inkjet polyester plates. Polyester CTP Plates for Epson inkjet printers. Chemical Polyester plates for Epson Inkjet printers, GenieJet plates, Genie Jet plates, Genie inkjet plates, genie inkjet polyester plates