DTF Station Prestige XL3 24" DTF Printer Bundle Kit
Unleash true color with the XL3 DTF Printer, equipped with three advanced Epson i3200 printheads that deliver stunningly vibrant prints with an expanded color range thanks to the addition of Red, Green, Blue, and Orange inks.
Designed for high-demand environments, this printer boasts cutting-edge maintenance features like the White Ink Management System and automatic cleaning cycles, ensuring minimal downtime and maximum productivity. Pair the XL3 with DTF Station's line of shakers for one of the most optimal, automated DTF printing workflows around.
Features
- 3 Epson i3200 printheads
- More Color, Better Prints: Addition of Red, Green, Blue, and Orange ink makes for more accurate, vibrant prints and wider possible color range
-
Advanced Maintenance Features:
- White Ink Management System (WIMS): timed white ink stirring system to circulate and maintain white ink inside printer
- Passive Auto-Cleaning: when printer is left on, it will automatically maintain and clean printhead every 4 hours
- Active Auto-Cleaning: during set intervals (even during printing), printer can stop to clean printhead
- Auto-Wet Capping: printhead sits inside cleaning solution while idle, helping to prevent clogging
-
Advanced Sensors:
- Head Strike Sensor: helps prevent damage to printhead
- Auto Ink Alert System: informs user when ink is running low
- Automatic Film Sensor: if film runs out/is not detected, stops printing
- 1L bulk ink cartridges
- Attachment Station: Perfect for add-ons, such as the Printflo Barcode Automation System
-
Variety of adjustable settings including:
- Belt Speed
- Powder Shaking Power
- Cooling
- Suction
Benefits
- More Color, Better Prints: Addition of Red, Green, Blue, and Orange ink makes for more accurate, vibrant prints and wider possible color range
- Perfect for advanced productions: Get the best DTF prints at industrial speeds
- Advanced maintenance features: The suite of maintenance features on the XL3 ensures less downtime for non-stop production and a longer lifespan for your investment
- Easy access/repair: intuitive, labeled board design and connections for easy access and repair
What's Included
- DTF Station XL3 24" DTF Printer
- DTF Station Seismo L24R Shaker and Dryer
-
DTF Station Purifier L2 Portable Air Filter
- Starter Supply Bundle (Film, Ink, and Cleaning Supplies)
- 2 - 24” DTF Quick Glide Film Roll
- 1 of each - DTF Ink 1kg - CMYK+RGBO
- 2 DTF Ink 1kg - White
- 3 1kg DTF Powder (White)
- 50 - 7” Cleaning Swabs
- 1kg DTF Cleaning Solution
- 16oz Isopropyl Alcohol
- 30 - Lintless Wipes 4” x 4”
- On-site Training
- DigiRIP RIP Pro Software - including fully functional Software Trial Version (15 Day Free Trial)
- Conditional 6 Month Warranty on up to 2 Printheads & Limited 1 Year Warranty on Non-Consumable Parts*
- *Use of non-DTF Station ink, film, powder, or other supplies will void warranty coverage. Must complete on-site training. Other terms & Conditions apply. Visit link for full details.
- Parts & Accessories
- USB - Important Resources & Files
- Ink Reservoir
- Y Shape Connectors
- Ink Filters
- Ink Tube 1m
- Straight Connectors
- Dampers
- M3x8 Screws
- M4x6 Screws
- M3x10 Screws
- M5x10 Screws
- M6x16 Screws
- Magnets
- Printer Panel Key
- Waterproof Tape
- 30ml Syringes
- Printhead Cables
- Power Cord
Compatible With
- DigiRIP RIP Pro Software
- Color Prime DTF Supplies (Ink, Powder, and Film)
- DTF Station Seismo L24R DTF Powder Shaker & Dryer
Not Included, but Also Needed:
- Heat Press (used to press final print to garment - 16" x 20" recommended)
- Humidifier (to keep the humidity above 50% in the print room)
- Computer with Windows 10 or higher
Upgrading from the A4 model? See the DTF Station Trade-In Program for getting a credit.
Printer Specifications:
- Printhead: 3 Epson i3200 printheads
- Mainboard: Hoson
- Interface: TCP
- Software: DigiRIP Pro RIP Software (Compatible with Windows Only)
- Max. Film Width: 24" (61 cm)
- Max. Print Width: 23.62" (60 cm)
- Printing Speed: 60 - 80 sq. ft./hour (30-40% Eclosion Setting in Hoson)
- Daily Output: 350 - 500 pcs (Based on 12”x14” design size, 8 hours per day)
- Product Weight: 445 lb
- Packaging Weight: 580 lb
- Dimensions (WxDxH):
- Product: 74.21" x 29.5" x 65.11"
- Packaging: 82.68 " x 38" x 28"
- Power Requirements: 1000W, 110V, 9A
System Requirements
- Operating System: Windows
- Minimum RAM: 8GB
- Minimum CPU: Intel i5 2.6GHz
- Minimum Free Storage: 5GB
WARNING: Work in a WELL VENTILATED AREA and use protective equipment when working with DTF products and processes. It is highly recommended the use of a Fume Extractor to handle the fumes caused by TPU adhesive powder curing. Bodily protection, including the use of PPE equipment such as a full body covering, a respirator / N95 mask, goggles and gloves are recommended to protect against TPU adhesive powder (prior to curing) that may become airborne due to handling. Inhalation of TPU adhesive powder or fumes may be hazardous to your health. The use of DTF equipment, chemicals, powders, inks and all accessories are at the sole risk of the user. DTF equipment is intended for use in a commercial environment. It is not recommended to use DTF equipment in a residential, or in-home setting. DTF inks and film require a good humidity environment - over 50% humidity is highly recommended to minimize the risk of ink clogs and film buckling. Add a Fume Extractor to this package for sufficient fume extraction.
DTF printers require daily use/maintenance! You must perform a head cleaning, nozzle check and a test print every day to ensure the printer is running smoothly and to prevent printhead and capping station clogs. Printheads and capping stations are considered consumables and are not covered under warranty if they clog. Clogs can occur even after one print, so maintenance must start the moment you install ink.