DTF Station Prestige R2 13" Shaker Bundle

From $8,699.00
Shipping calculated at checkout.

Training: Virtual Training

Virtual Training
On Site Training
$8,699.00
SKU:
Categories: DTF Equipment, Featured Products, New Products
amazon paymentsamerican expressapple paydankortdiners clubdiscoverdogecoindwollaforbrugsforeningeninteracgoogle payjcbmaestromasterpaypalshopify payvisa

Print with precision and flair with the Prestige R2 DTF Printer! With its chic, integrated design, this printer combines elegant desktop convenience with powerful performance for all those looking to get started with DTF. Virtual Training is included with your purchase, or you can opt for On-Site Training for an additional fee.

The Miro 13 is DTF Station's powdering and drying solution for every A3 and A4 sized DTF workflow.

Due to more optimized and even heating, power consumption has dropped to 1100W, making for a more cost-efficient and accessible powdering solution. Plus, the built-in air purifier on the Miro 13 ensures a safer, more eco-friendly working environment that saves space taken by an external air purifier.

*AVAILABLE FOR LOCAL PICKUP IN CALIFORNIA, CALL FOR AVAILABILITY*

    Features and Benefits:

    • Speed: 27 sq. ft/hour, 6pass
    • White Ink Management System (WIMS): Timed white ink stirring system to circulate and maintain white ink inside the printer
    • Passive Auto-Cleaning: When the printer is left on, it will automatically maintain and clean the printhead every 4 hours
    • Active Auto-Cleaning: During set intervals (even during printing), the printer can stop to clean the printhead
    • Head Strike Sensor: Helps prevent damage to the printhead
    • 1 Liter Bulk Ink Cartridges: More ink for all your printing needs
    • Auto Ink Alert System: Informs the user when ink is running low
    • Automatic Film Sensor: If film runs out/is not detected, stops printing
    • Size: Desktop sized
    • Great for Beginners: The perfect balance of power and affordability
    • Easy Access/Repair: Intuitive, labeled board design and connections for easy access and repair
    • Built-in air purifier & smoke recycling system: save space and your workspace
    • Lower heating system: more even heating and curing
    • Easy to operate: powder shaking, curing, and air purifying in one machine
    • Low power consumption: 1100W
    • Simple setup: turn the power on and start
    • Full tech support: tech videos, direct support messaging through Slack, and more!

    What's Included:

    • DTF Station Prestige R2 DTF Printer
    • DTF Station Miro 13 DTF Powder Shaker and Dryer
    • DigiRIP RIP Software - including fully functional Software Trial Version (15 Day)
    • Color Max DTF Pigment Ink (CMYKW) - 1kg (1 each)
    • Color Prime Universal DTF Film Roll - A3+ (13") x 109 yd
    • Color Prime Hot Melt Powder - 1kg
    • DTF Station Cleaning Solution - 250 ml
    • Isopropyl Alcohol 16oz
    • Lintless Wipe 4 x 4 30 Each
    • DTF Station 7" Cleaning Swabs - 50 Each
    • Power Cord
    • Tools
    • Ink Dampers
    • Ink Filters
    • Ink Tube
    • Ink Diverter
    • USB Dongle
    • Ribbon Cables
    • Screws
    • Feed roller components

    Not Included, but Also Needed:

    • Heat Press (used to press final print to garment - 16" x 20" recommended)
    • Humidifier (to keep the humidity above 50% in the print room)
    • Computer with Windows 10 or higher

    Upgrading from the A4 model? See the DTF Station Trade-In Program for getting a credit.

    Printer Specifications:

    • Printer head: Dual Epson XP600 print heads
    • Mainboard: Honson
    • Interface: TCP
    • Software: DigiRIP RIP Software (Compatible with Windows Only)
    • Max. Film Width: to 13" (33 cm)
    • Print Speed: 27 sq ft / hour, 6pass
    • Power Ratings: 700 Watts / 110 Volts / 6.36 Amps
    • Machine Weight: 110 lbs
    • Machine Dimensions: 29" x 14" x 14"
    • Shipping Weight: 142 lbs
    • Shipping Dimensions: 32 1/4" x 15 3/4" x 15 3/4"
    • Daily Output: 160 pcs (Based on design size as 12" x 14", 8 hrs per day)

    Shaker and Dryer Specifications:

    • Max Film Width: 13" (33cm)
    • Control Panel: Switch on/off
    • Power Consumption: 1.17KW, 10.6A(110V)
    • Voltage: 110VAC(10%) 50/60HZ
    • Product Weight: 77.16 lbs. / 35kg
    • Packaging Weight: 110.23 lbs. / 50kg
    • Product Dimensions: 40.03" D x 22.44" W x 19.92" H / 1017*570*506 mm
    • Packaging Dimensions: 28.34" D x 24.40" W x 19.29" H / 720*620*490 mm
    • Warranty Policy

    System Requirements

    • Operating System: Windows
    • Minimum RAM: 8GB
    • Minimum CPU: Intel i5 2.6GHz
    • Minimum Free Storage: 5GB

    WARNING: Work in a WELL VENTILATED AREA and use protective equipment when working with DTF products and processes. It is highly recommended the use of a Fume Extractor to handle the fumes caused by TPU adhesive powder curing. Bodily protection, including the use of PPE equipment such as a full body covering, a respirator / N95 mask, goggles and gloves are recommended to protect against TPU adhesive powder (prior to curing) that may become airborne due to handling. Inhalation of TPU adhesive powder or fumes may be hazardous to your health. The use of DTF equipment, chemicals, powders, inks and all accessories are at the sole risk of the user. DTF equipment is intended for use in a commercial environment. It is not recommended to use DTF equipment in a residential, or in-home setting. DTF inks and film require a good humidity environment - over 50% humidity is highly recommended to minimize the risk of ink clogs and film buckling. Add a Fume Extractor to this package for sufficient fume extraction.

    DTF printers require daily use/maintenance! You must perform a head cleaning, nozzle check and a test print every day to ensure the printer is running smoothly and to prevent printhead and capping station clogs. Printheads and capping stations are considered consumables and are not covered under warranty if they clog. Clogs can occur even after one print, so maintenance must start the moment you install ink.