STS VJ-628D DTF 24” ONLINE BULK BUNDLE with AUTO Shaker with air Filter and Auto White recirculatory Unit
DTF 24" ONLINE BULK BUNDLE with AUTO Shaker with air filter and Auto White recirculatory Unit
DTF 24" Printer Bulk Bundle with Built-in re-circulator for the white inks
At just 24 inches wide, the STS VJ-628D fits into any size print shop. And because it's
powered by STS Inks, you can easily and quickly create custom t-shirts and apparel.
This Japanese made compact printer even fits onto a table or optional rolling stand for
your use. With a low price point and perfect size, the VJ-628D is the best option for
anyone entering the custom apparel marketplace.
These Units must be PreOrdered
Install extra call for pricing
Freight Quoted separately
| STS VJ-628D Direct to Film Printer | 1 |
| Direct to Film 220ml Cart.- Cleaning Solution | 8 |
| Inkjet Film-Cold Peel Single Sided Matte (roll) | 1 |
| Direct to Film- High Capacity- Set of 6 | 1 |
| Direct to Film 1L Clear Bag-Cyan | 1 |
| Direct to Film 1L Clear Bag - Magenta | 1 |
| Direct to Film 1L Clear Bag- Yellow | 1 |
| Direct to Film 1L Clear Bag-Black | 1 |
| Direct to Film 1L Clear Bag-White | 2 |
| DTF Edition RIP Software | 1 |
| DTF-P-1 TPU Powder- Low Temp 225 F - 2 KG | 1 |
| Direct to Film Stand | 1 |
| Print Method | Drop-On Demand, Piezo Drive |
| # of nozzles / # of heads | (180 x 8 rows) / 1 head |
| Ink type | DTF |
| Variable dot | Yes |
| Minimum droplet size | 3.5 pl |
| Print modes | 720/540/360 dpi 12 modes + |
| Color options | CMYK + 2W + 2 Cleaning |
| Maximum resolution | 1440 dpi |
| Head height | Low: 12mm / High 2.5mm |
| Maximum media width | 24.8 inches |
| Maximum print width | 24.4 inches |
| Heating system | Pre / Post |
| Media roll diameter / Core | 6′ maximum / Core 3″ or 2″ |
| Stand | Optional |
| Media Auto Cut | Standard |
| RIP software | SAI/ White RIP STS - DTF |
| Power requirements | 110/220 Volt |
| Operating temperature | 68°F - 75°F |
| Operating humidity range | 45% -55% |
| Dimensions (printer) WxDxH | 47″ x 17″ x 14″ |
| Dimensions (printer with stand) | 47″ x 23″ x 46″ |
| Weight (printer) | Printer 70 lbs / Stand 19 lbs |
| Weight (shipping info) | Call for quote |
| Limited warranty | 1 Year |
ONLINE Auto TPU Powder Shaker and dryer
After the STS VJ-628D prints your design, our Automatic TPU Adhesive Powder Shaker takes over by evenly spreading, then melting the exact amount of adhesive material directly onto your design saving time, effort and cost. Three resources you need to conserve to run a profitable business. Also, with a handy vacuum absorption platform and infrared heat drying, you are assured a smooth result every time.
1 year warranty
Shaker Measurements: 35.4" W / 62.9" L / 45.6" H
WIRE PAYMENTS ONLY
Freight quoted separately