Adhesive Backed Water-Proof White Vinyl for Aqueous Water-Based Inkjet Printers
Adhesive Backed Water-Proof White Vinyl for Aqueous Water-Based Inkjet
Printer/Ink Compatibility:
Ink saturation level of this product is 250% and heavy coated paper setting in most RIPs is appropriate. Inkjet coating is designed for use primarily with dye based inks. Although pigmented inks may be used, a slight color gamut difference may be observed. Product can be printed on Encad/Kodak (dye inks only), Hewlett-Packard DesignJet (2xxx/3xxx/5xxx), ColorSpan Displaymaker (dye inks only), Epson Stylus Pro (7xxx/9xxx), Mimaki JV4 (pigmented inks only) Canon and Roland
Hi-Fi Jet (pigmented inks only)
Ink Dry Time: Varies with type and amount of ink, relative humidity and temperature.
Properties:
Product Number: KJWPV5002
Material: 3.2 mil White Calendered Vinyl
Adhesive: Clear Permanent Acrylic
Caliper/Gauge: 13.8 mil (Coating, Vinyl, Adhesive & Liner)
Weight: 345 g/m2 (14.7oz/yd2)
Whiteness: 105
Brightness: 99
Gloss (60°): 2.6 (avg)
Printing: 60-80° F, 50% Relative Humidity
Ideal Storage Conditions: 70° F (21° C), 50% Relative Humidity, store in original
packaging.
Handling Requirements: Due to absorptive nature of the coating, avoid touching the coated surface with bare skin. Always
wear cotton gloves when handling inkjet-coated
materials. Rolls are supplied with the coated surface
wound out. When rolling graphics, always roll so that the thinner material is on the outside surface of roll.
Life Expectancy: Outdoor - up to 6 months without lamination.
Shelf Life: 6 months from ship date when stored in proper
conditions.
Finishing/Lamination: A pressure sensitive vinyl laminate is recommended, to give surface protection from dirt and abrasion. Thermal laminates should not be used. Before lamination, please allow image to dry for 24 hours.